Kingston Memory KVR26N19S6L/4 4GB 2666MHz DDR4 Non-ECC CL19 DIMM 1Rx16 VLP Retail
Product: Kingston Memory KVR26N19S6L/4 4GB 2666MHz DDR4 Non-ECC CL19 DIMM 1Rx16 VLP Retail
Description: DESCRIPTION
This document describes ValueRAM's KVR26N19S6/L4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, VLP (very low profile) memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
8 internal banks; 2 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 0.738 (18.75mm)
RoHS Compliant and Halogen-Free
CL(IDD)
19 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
TBD W(Power will vary depending on the SDRAM used.)
UL Rating
94 V - 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
Item Dimension (L"xW"xH")
7 x 3 x 1
Weight
1.00 LB
Warranty Information
Lifetime Manufacture Warranty
Model: KVR26N19S6L/4
UPC: 0740617290417
Brand: Kingston
Price: $ 43.01
Condition: New unused item in original box.
Availability: Out Of StockShipping: FREE to Continental US, Contact us for international shipping quote.
Available from: AIP
Store Category: RAM
Reviews
Viewed: 62 times
Questions
Ask a question about this product.